Laminate Flooring Threshold Transition Strip,Door StripThreshold Bars,Self Adhesive PVC Vinyl Flooring Edge Trim,Floor Joining Strip,Tile to Laminate Transition Strip(2m*5cm,Grey)
(as of Jan 29,2023 18:20:29 UTC – Details)
Before installation, the floor must be clean and dry (no water), otherwise the red self-adhesive will not stick
The carpet transition strip may be bent during transportation, please don’t worry, the soft PVC material can be squeezed at will, it can be heated with a hair dryer to make it flat.
Wildly Use: The floor transition strip can be used for floor-to-floor and tile-to-floor, wood-to-floor gap coverage and connection(gap connection and coverage less than 1.5 cm),threshold transition at the edge of the floor (height less than 0.7 cm Threshold threshold),and ground identification demarcation.
Notice: Our store provide floor sill cover of two sizes :5cm in width and 4cm in width.5cm wide models are recommended to cover gaps <3cm, and 4cm wide models are recommended to cover gaps less than 2cm. If you need to transition the threshold slope, you can buy it based on your experience.
Free Cutting:The flat threshold bar is 1m/2m/3m in length,can be free to cut to any size as you need, please measure the required size before cutting.
Self-adhesive,Easy to Install: First clean the floor or tiles and dry,then cut the required length according to the needs, and then paste one end first, tear off the tape, and press and install it at the same time.